Skyward Building Services provides commercial floor care across the Chicago metro and the other states where it operates, for offices, retail properties, schools, healthcare facilities and industrial buildings. The work covers floor scrubbing, stripping and waxing, buffing and burnishing, carpet cleaning and extraction, and surface-specific care for tile, stone, concrete, wood and laminate.
Whether a floor needs a one-time restoration or a recurring maintenance program, the schedule is built around the floor type, the traffic and your operating hours, so periodic work happens before the floor shows wear rather than after. Crews follow defined procedures, supervisors verify the result, and one named manager is accountable for it.
Floor care sits alongside, not inside, everyday cleaning: nightly janitorial service keeps floors swept, vacuumed and mopped, while periodic floor care restores and protects the finish.
Our Commercial Floor Care Services
Floor Stripping & Waxing
For vinyl composition tile (VCT) and other resilient floors with a protective finish. The old finish is stripped, the floor is rinsed and neutralized, and fresh coats of finish are applied and allowed to cure before traffic returns. Facilities usually buy it when the finish has yellowed, scuffs no longer buff out, or a space is being turned over or reopened. How often depends on traffic, and scrubbing and burnishing in between stretch the time between strips.
Floor Scrubbing, Buffing & Burnishing
Machine scrubbing removes ground-in soil that mopping leaves behind, and buffing or high-speed burnishing brings back the gloss on a finished floor. This is the maintenance layer between full strips: entrances, corridors and sales floors are scrubbed and burnished on a set cycle, while low-traffic rooms need it less often.
Commercial Carpet Cleaning & Extraction
Nightly vacuuming and spot treatment keep carpet presentable. Periodic carpet cleaning, shampooing or hot-water extraction removes the soil vacuuming cannot reach and is scheduled on a fixed calendar, with high-traffic paths and entrances done more often than private offices.
Tile, Grout & Stone Floors
Ceramic and porcelain tile, grout lines and natural stone are cleaned with methods and products matched to the surface. Acidic or abrasive cleaners that etch stone or break down grout are kept off those floors, and the right method for each surface is written into the scope.
Concrete & Industrial Floors
Warehouse, plant and loading-dock floors are cleaned with ride-on and walk-behind scrubbers, with walk paths, dock edges and spill-prone zones prioritized. As project work, Skyward also handles concrete repair, epoxy floor systems and line striping. See warehouse cleaning for the full industrial scope.

Floor Maintenance Programs by Surface Type
Each floor gets two layers: routine upkeep from the nightly crew, and periodic floor care on a schedule set at the walkthrough by traffic and finish.
| Surface | Routine upkeep | Periodic floor care |
|---|---|---|
| VCT and resilient tile | Dust mop, damp mop, spot clean | Scrub and burnish; full strip and refinish |
| Carpet | Vacuum, spot treatment | Extraction or shampooing on a fixed calendar |
| Ceramic, porcelain and grout | Sweep, damp mop with a neutral cleaner | Machine scrub and grout cleaning |
| Natural stone | Dust mop, stone-safe cleaner | Deep clean with stone-safe products |
| Sealed or epoxy-coated concrete | Sweep, auto-scrub high-traffic lanes | Deep scrub; coating repair as project work |
| Wood and laminate | Dust mop, minimal-moisture cleaning | Buffing; no wet mopping |
Commercial Floor Care for Chicago Facilities
Chicago winters are the hardest season on commercial floors. Snow, slush and road salt are tracked in from November to March, leaving salt residue that dulls finishes and wears carpet. Winter scopes add more frequent entrance scrubbing, matting and salt-residue removal, and heavier periodic work such as stripping and refinishing is scheduled for quieter periods.
Skyward is headquartered in the Greater Chicago area and serves Cook, DuPage, Will, Lake and Kane counties. Floor work is scheduled at night, on weekends or outside business hours so it does not interrupt operations. See commercial cleaning in Chicago or all Illinois locations.
How Skyward Runs It
Walkthrough and scope
We walk the building with you, note space types, traffic, access and risk, and write a scope that says exactly what is done, where and how often. Commercial cleaning is scoped on site, not from a form.
Routes, zones and launch
The facility is divided into defined zones and crews work assigned routes with clear tasks and sequencing, so results do not depend on memory or on who is working that night. A supervisor leads the first shifts.
Daily verification and an owner
Completion checks, visual verification and supervisor walkthroughs create a daily quality rhythm. A named manager with a clear escalation path owns the result, so you are not managing your vendor's crew.
Frequently Asked Questions
What types of commercial flooring does Skyward maintain?
How often should commercial floors be stripped and waxed?
Can floor care be scheduled outside business hours?
Do you offer one-time floor restoration and ongoing maintenance?
Related Services and Industries
Most clients combine this with other Skyward programs so one team is accountable for the building.
- Janitorial Services
- Deep Cleaning Services
- Retail cleaning
- Office cleaning
- Education cleaning
- Auto Dealerships cleaning
Serving the Chicago metro: Chicago, Arlington Heights, Aurora, Bolingbrook, Downers Grove, Elgin, Elmhurst, Hodgkins, Naperville, Palatine, Schaumburg and Wheaton (see all of Illinois), plus Milwaukee, Madison and Indianapolis. Or read how Skyward operates.
Need a floor care plan?
Tell us the floor types, square footage and traffic pattern. We will scope a periodic program that fits around your hours and your janitorial schedule.
Request a Site Assessment